PA610注塑用尼龙树脂：
PA610是一种具有较高耐磨性和韧性的特种工程塑料；
尼龙610与尼龙6和尼龙66相比，尼龙610更加柔软，吸水率低、具有良好的耐低温性能和尺寸稳定性，耐油、耐化学品、电气性能良好、属自熄材料。
可用于高耐磨性和拉伸要求的各种注塑件等产品。
| NO. | ITEM | TEST METHODS | TEST CONDITION | UNIT | Typical value | ||
| Ⅱ | |||||||
| Physical Propertids | |||||||
| 1 | Density | GB/T1033 | 23?C | -- | 1.06 | ||
| ISO1183 | |||||||
| 2 | Molding shrinkage | GB/T 15585 | ‐ | % | 1.1 | ||
| 3 | Shore hardness | GB/T2411 | ‐ | D | 82 | ||
| ISO2039 | |||||||
| 4 | Melting point | GB/T 4608 | ‐ | ?C | 215 | ||
| ISO3146 | |||||||
| Mechanical Propertie | |||||||
| 5 | Tensile strength | GB/T 1040 | 50mm/min | Mpa | 59 | ||
| ISO527 | |||||||
| 6 | Nominal strain at break | GB/T 1040 | ‐ | % | 168.2 | ||
| ISO527 | |||||||
| 7 | Flexural strength | GB 9341 | 2mm/min | Mpa | 77.1 | ||
| ISO178 | |||||||
| 8 | Flexural Module | GB /T9341 | 2mm/min | Mpa | 1881.7 | ||
| ISO178 | |||||||
| Remark | |||||||
http://www.zengqiangnilong.com/products/PA610/%E6%B3%A8%E5%A1%91%E7%94%A8PA610%E5%B0%BC%E9%BE%99%E6%A0%91%E8%84%82.html
http://www.suliaogaixing.com/chanpin/yuancailiao/413.html
http://www.lyuechem.com/products/PA1212.html
http://www.gaixingchang.com/gaixingnilong/27.html
